DETERMINATION OF THE AMOUNT OF HEAT TRANSFERRED THROUGH THE WALLS OF A SYMMETRIC CHANNEL FOR USE AS THE BLADES OF WIND TURBINES WITH A VERTICAL AXIS OF ROTATION
Manatbayev Rustem, Kalassov Nurdaulet, Abdieva Zeine, Zhailauhan Ardak, Shaimardan Riza
Strony: 90-95
Opublikowano: 2 Jun 2014
Wyświetlenia: 3,119
Pobrania: 522
Streszczenie: The Republic of Kazakhstan in terms of geography is in a wind zone of the northern hemisphere, and large parts of Kazakhstan there are enough strong air currents, especially the north-east, south-west directions. In some areas of Kazakhstan annual average wind speed is greater than 6 m/s, making these areas attractive for wind power development. In times of greatest need for heat and power generation of wind turbines can be damaged due to wet snow drifts, followed by a sharp decrease in air temperature and the formation of heavy ice on them. One possible way to protect the outer surface of the operating wind turbines from sticking of wet snow is heated by warm air flowing through the internal channels of the device. Thermal protection is a more radical way. This paper discusses the method of calculating the flow of heat through the wall of the air of the real device. Using this methodology, complete consumption were determined amount of heat to the walls of a specific channel.
Słowa kluczowe: a wind turbine, the reynolds number, the total amount of heat, warm air, the wind speed, the blade
Cytowanie artykułu: Manatbayev Rustem, Kalassov Nurdaulet, Abdieva Zeine, Zhailauhan Ardak, Shaimardan Riza. DETERMINATION OF THE AMOUNT OF HEAT TRANSFERRED THROUGH THE WALLS OF A SYMMETRIC CHANNEL FOR USE AS THE BLADES OF WIND TURBINES WITH A VERTICAL AXIS OF ROTATION. Journal of International Scientific Publications: Materials, Methods & Technologies 8, 90-95 (2014). https://www.scientific-publications.net/en/article/1000150/
Powrót do spisu treści tomu
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
