SILICA OBTAINED VIA PYROLYSIS OF "GREEN" TIRES AS AN ACTIVE FILLER IN NATURAL RUBBER BASED COMPOSITES
Yordan B. Kolev, Ivan A. Damyankin, Mihail C. Mihaylov, Milcho C. Ivanov
Strony: 278-286
Opublikowano: 2 Jun 2014
Wyświetlenia: 4,174
Pobrania: 1,437
Citations: 1 (Google Scholar)
Streszczenie: There’s a tendency towards a massive implementation of the so called “green” tires. The reinforcing filler in them constitutes mainly of SiO2. It provides lower rolling resistance and therefore lower fuel consumption compared with a carbon black. The object of the study is a new material containing silica and carbon black with nano-sized particles (SiO2D), produced by the recycling of scrapped „green” tires via pyrolysis, as a filler in rubber composites based on natural rubber. The curing characteristics, as well as the mechanical and dynamic properties of compounds, which contain SiO2D, conventional SiO2 and zinc soaps, have been studied. It has been established that the mechanical and dynamic properties of the vulcanizates filled with SiO2D are lower, but similar to those filled with conventional SiO2. The zink soaps containing mixtures have a lower viscosity and their vulkanizates have a lower aging resistance.
Słowa kluczowe: waste tires, pyrolysis, solid residue, silica, zinc soaps
Cytowanie artykułu: Yordan B. Kolev, Ivan A. Damyankin, Mihail C. Mihaylov, Milcho C. Ivanov. SILICA OBTAINED VIA PYROLYSIS OF "GREEN" TIRES AS AN ACTIVE FILLER IN NATURAL RUBBER BASED COMPOSITES. Journal of International Scientific Publications: Materials, Methods & Technologies 8, 278-286 (2014). https://www.scientific-publications.net/en/article/1000173/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
