ESTIMATION OF THE ENERGY EFFICIENCY OF A BOILER FACILITY IN CELLULOSE PRODUCTION LINE
Lubka Atanasova, Ginka Baikusheva-Dimitrova
Strony: 317-325
Opublikowano: 31 May 2015
Wyświetlenia: 3,486
Pobrania: 676
Streszczenie: The production of cellulose requires high amounts of heat. To assess the energy efficiency of a generator for production of saturated steam used in a cellulose production line, a modern method of analysis was used – the exergy analysis. The present paper reports for the elaboration of material, heat and exergy balances of a steam generator for saturated steam with parameters P=1.8 MPa and T=210 0С. The calculations are carried out on the basis of production data. The exergy efficiency was calculated to be 41.71 %. It was found that an increase of the temperature of the air fed into the combustion chamber and an increase of the parameters of the steam obtained will give higher efficiency of the steam generator.
Słowa kluczowe: exergy, exergy efficiency, cellulose production line, generator for production of saturated steam
Cytowanie artykułu: Lubka Atanasova, Ginka Baikusheva-Dimitrova. ESTIMATION OF THE ENERGY EFFICIENCY OF A BOILER FACILITY IN CELLULOSE PRODUCTION LINE. Journal of International Scientific Publications: Materials, Methods & Technologies 9, 317-325 (2015). https://www.scientific-publications.net/en/article/1000779/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
