COPPER SLAG OXIDATION UNDER ISOTHERMAL AND NON-ISOTHERMAL CONDITIONS
Diana Rabadjieva, Stoyko Gyurov, Daniela Kovacheva, Yoanna Kostova, Vilma Petkova, Nadya Petrova
Strony: 358-367
Opublikowano: 31 May 2015
Wyświetlenia: 2,822
Pobrania: 1,086
Streszczenie: Oxidation of copper slag in air under isothermal (at 700, 760, 800, 860 and 900oC) and non-isothermal (25 – 1000oC) conditions is studied using simultaneous DSC-TG and DTA-TG analysis with a flow rate of the oxidizing gas of 20 ml/min. Mechanism of the oxidizing process is proposed on the basis of the thermal curves and XRD studies. The values of the activation energy are calculated from the measured data (temperature, heating rate and weight change) using isoconversional methods. The differences in the obtained kinetic parameters are explained with the complexity and different mechanisms of the ongoing processes.
Słowa kluczowe: copper slag oxidation, thermal analysis, dta-tg, dsc-tg, kinetic data
Cytowanie artykułu: Diana Rabadjieva, Stoyko Gyurov, Daniela Kovacheva, Yoanna Kostova, Vilma Petkova, Nadya Petrova. COPPER SLAG OXIDATION UNDER ISOTHERMAL AND NON-ISOTHERMAL CONDITIONS. Journal of International Scientific Publications: Materials, Methods & Technologies 9, 358-367 (2015). https://www.scientific-publications.net/en/article/1000783/
Powrót do spisu treści tomu
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
