PREPARATION AND CHARACTERIZATION OF PASTES BASED ON CALCIUM PHOSPHATE POWDERS AND SODIUM HYALURONATE
Radost Ilieva, Ognyan Petrov, Elena Dyulgerova
Strony: 395-403
Opublikowano: 31 May 2015
Wyświetlenia: 3,782
Pobrania: 773
Streszczenie: Series of pastes were prepared on the basis of mono- or bi-phased calcium phosphate powders and solutions of sodium hyaluronate and its modifications as a liquid phase. Three procedures for preparation of the powders were applied and as a result samples with different chemical, phase and morphological characteristics were obtained. The influence of the particle size and morphology of the phases as well as of the composition of the liquid phase and the solid to liquid ratio on the formation features and mechanical strength of the pastes were investigated. Their influence on the micro-environment surrounding by in vitro tests of dried molds in simulated body fluid and in distilled water were followed as well. The results showed that the materials are promising for practical use in medicine.
Słowa kluczowe: paste-like materials, calcium phosphates, hydroxyapatite, β-tricalcium phosphate, sodium hyaluronate
Cytowanie artykułu: Radost Ilieva, Ognyan Petrov, Elena Dyulgerova. PREPARATION AND CHARACTERIZATION OF PASTES BASED ON CALCIUM PHOSPHATE POWDERS AND SODIUM HYALURONATE. Journal of International Scientific Publications: Materials, Methods & Technologies 9, 395-403 (2015). https://www.scientific-publications.net/en/article/1000787/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
