NUMERICAL STUDY FOR THE ANALYSIS OF DEFECTS IN METAL INJECTION MOLDING PROCESS
Mohamed Kezrane, Mounir Zirari
Strony: 470-480
Opublikowano: 31 May 2015
Wyświetlenia: 3,842
Pobrania: 1,163
Streszczenie: Metal injection molding (MIM) is a complex manufacturing process which is used for producing complex-shaped parts of various materials. The MIM is a combination of four sequential technological processes which has an effect on the quality of the final parts. If the molding step is made with a poor mould design or unsuitable chosen injection parameters, it will results defects. These defects can be rectified by optimizing process parameters and mold design with trial and error technique. The main purpose of this paper is to present the results of the numerical simulation of mold filling by casting the liquid metal (aluminum) in a metal mold. The influence of some processing parameters such as cooling time, injection temperature, injection pressure and flow rate on the defects generated after cooling the liquid metal have been investigated. The finite element method (FEM) is used in the numerical simulation to solve the set of governing equations using Ansys software. The volume of fluid (VOF) approach is used for tracking moving free surfaces during the cooling process.
Słowa kluczowe: metal injection molding, numerical simulation, finite element method, volume of fluid approach
Cytowanie artykułu: Mohamed Kezrane, Mounir Zirari. NUMERICAL STUDY FOR THE ANALYSIS OF DEFECTS IN METAL INJECTION MOLDING PROCESS. Journal of International Scientific Publications: Materials, Methods & Technologies 9, 470-480 (2015). https://www.scientific-publications.net/en/article/1000795/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
