THE IMPACT OF STORAGE CONDITIONS OF PULP ON ITS SUSCEPTIBILITY TO REFINING AND PROPERTIES OF FIBERS
Marta Kucner, Piotr Przybysz, Marcin Dubowik, Kamila Przybysz, Edyta Małachowska
Strony: 224-231
Opublikowano: 1 Jul 2016
Wyświetlenia: 3,024
Pobrania: 541
Citations: 1 (Google Scholar)
Streszczenie: This article presents the impact of a degree of polymerization on the papermaking potential of paper. Bleached pinewood kraft pulp from one of paper mills was used for research purposes. The main objective of this work was to investigate the influence of a degree of polymerisation of pulp on the properties of fibres such as water retention value (WRV) and the fines content etc. Different degrees of polymerization were obtained as a result of the pulp drying at different temperatures (105˚C, 130˚C and 150˚C) for a period from 1 hour up to 150 hours. During the drying process, a visible decrease in a degree of polymerization of cellulose in hornified fibres occurs. Significant differences in pulp properties can be observed in particular in case of pulps dried at a very high temperature (150°C) and in case of a long drying time (150 h).
Słowa kluczowe: paper, papermaking potential, drying, cellulose pulps, wrv, temperature
Cytowanie artykułu: Marta Kucner, Piotr Przybysz, Marcin Dubowik, Kamila Przybysz, Edyta Małachowska. THE IMPACT OF STORAGE CONDITIONS OF PULP ON ITS SUSCEPTIBILITY TO REFINING AND PROPERTIES OF FIBERS. Journal of International Scientific Publications: Materials, Methods & Technologies 10, 224-231 (2016). https://www.scientific-publications.net/en/article/1001145/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
