PHOTOVOLTAIC MODULE STRUCTURE UNDER THE HIGH DC VOLTAGE STRESS
V. Šály, J. Packa, M. Perný, M. Andráš, J. Tomica
Strony: 9-18
Opublikowano: 12 Sep 2020
Wyświetlenia: 1,832
Pobrania: 257
Citations: 1 (Google Scholar)
Streszczenie: Today photovoltaic (PV) power sources are often photovoltaic systems of high power and so the string DC voltage can increase to hundreds of volts. Such a high voltage stresses the PV module structure including solar cells, encapsulants, supporting and protecting layers. Attention in our study is focused on changes in the electrical parameters of PV cells and modules due to thermal and potential degradation. Tests were performed on the PV mini-modules. The test modules were subjected to a controlled heat treatment and a 1000 V DC voltage stress, which is often accompanied by potentially induced degradation (PID), in the thermal chamber. Measurement of the electrical parameters of the measured samples was performed before the stress and after possible degradation process.
Słowa kluczowe: photovoltaics, encapsulant, degradation, potential induced degradation, architecture, pv installation
Cytowanie artykułu: V. Šály, J. Packa, M. Perný, M. Andráš, J. Tomica. PHOTOVOLTAIC MODULE STRUCTURE UNDER THE HIGH DC VOLTAGE STRESS. Journal of International Scientific Publications: Materials, Methods & Technologies 14, 9-18 (2020). https://www.scientific-publications.net/en/article/1002043/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
