EFFECT OF HEAT TREATMENT ON MECHANICAL PROPERTIES OF 3D PRINTED SPECIMENS
Martin Baráth, Martina Hajková, Martin Kotus
Strony: 275-281
Opublikowano: 16 Nov 2022
Wyświetlenia: 444
Pobrania: 61
Streszczenie: Currently, there is a need in some areas of metal construction materials for their lighter and cheaper alternative, which will have the same or better properties in terms of value and price. One of the most suitable and used alternatives are composite materials. When choosing a suitable composite material, it is necessary to take into account not only the necessary mechanical properties, but also the thermal load of the machine part. There were no permanent changes in the properties of metal materials, but we can notice changes in properties of composite materials that can positively or negatively affect the strength or life of the part. Due to this fact, presented is focused on the application of the effect of thermal loading of components made of composite materials using 3D printing on their mechanical properties. Laboratory tests were performed on test specimens prescribed for individual tests of mechanical properties. After performing the process of annealing the samples, we performed mechanical tests. Based on the obtained results, it is possible to determine the effect of annealing to the mechanical properties of the selected material and also we can determine the maximum operating temperature at which the properties of the material do not deteriorate.
Słowa kluczowe: 3d print, annealing, tensile strength, composite, heat treatment
Cytowanie artykułu: Martin Baráth, Martina Hajková, Martin Kotus. EFFECT OF HEAT TREATMENT ON MECHANICAL PROPERTIES OF 3D PRINTED SPECIMENS. Journal of International Scientific Publications: Materials, Methods & Technologies 16, 275-281 (2022). https://www.scientific-publications.net/en/article/1002530/
Powrót do spisu treści tomu
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
