PRODUCTION OF COPPER MATRIX COMPOSITES
Öznur Akyol, Tuğba Mutuk
Strony: 73-79
Otrzymano: 30 Jul 2025
Opublikowano: 27 Dec 2025
DOI: 10.62991/MMT1996722134
Wyświetlenia: 462
Pobrania: 53
Streszczenie: Composites containing two or more distinct components, and having significantly different chemical, physical, and mechanical properties, are important materials for engineering applications. Copper is widely used as a matrix material in aviation, space, transportation, and electrical contact transmission due to its excellent electrical conductivity and its lubrication and friction prevention performance. Copper, which is one of the most basic components of the electrical and electronics sector, also has high thermal conductivity. In addition, copper is preferred in many engineering applications due to its low thermal expansion coefficient, good oxidation resistance, high corrosion resistance, high alloying ability, low cost, and good ductility. However, despite the many excellent properties of copper, its ductility makes it vulnerable to mechanical stresses. In the study, TiB2 ceramic particles with properties such as high hardness, wear resistance and good thermal stability were reinforced into the copper matrix as a reinforcement material. The mechanical properties of the obtained composite will be investigated.
Słowa kluczowe: copper, tib2, powder metallurgy, mechanical properties
Cytowanie artykułu: Öznur Akyol, Tuğba Mutuk. PRODUCTION OF COPPER MATRIX COMPOSITES. Journal of International Scientific Publications: Materials, Methods & Technologies 19, 73-79 (2025). https://doi.org/10.62991/MMT1996722134
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
