STUDY OF LIQUID DISTRIBUTORS FOR SOILED AND THICK LIQUIDS
Simeon R. Darakchiev, Svetoslav Tz. Nakov
Strony: 405-412
Opublikowano: 1 Jan 2013
Wyświetlenia: 243
Pobrania: 23
Streszczenie: Two types of overflowing liquid distributors for soiled and thick liquids are investigated. Experiments are performed in a device for packed column apparatuses with a diameter of 426 mm. The relationship between the flow rates of distributors with beveled pipes and with triangular slits is determined as well as the height of liquid column above the lower end of the slots. Also is investigated the uniformity of the distributing jets depending on the flow rate, as is recommended this to be done with standard deviation not exceeding 0.03. With this precision, the distributor with beveled pipes 3 3 operates in the range between 2.0 and 8.0 m /h, as its maximum capacity is 8.5 m /h. The distributor 3 with triangular slits has maximum output of 6.3 m /h. Therefore it is not recommended.
Słowa kluczowe: packed columns, distillation columns, liquid distributors, soiled and thick liquids
Cytowanie artykułu: Simeon R. Darakchiev, Svetoslav Tz. Nakov. STUDY OF LIQUID DISTRIBUTORS FOR SOILED AND THICK LIQUIDS. Journal of International Scientific Publications: Materials, Methods & Technologies 7, 405-412 (2013). https://www.scientific-publications.net/en/article/1003122/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
