SYNTHESIS AND PROPERTIES OF NANO-POROUS TITANOSILICATES
Anatoly I. Nikolaev, Lidia G. Gerasimova, Marina V. Maslova, Daria V. Spiridonova, Victor N. Yakovenchuk, Gregory Yu. Ivanyuk
Strony: 25-34
Opublikowano: 1 Jan 2012
Wyświetlenia: 249
Pobrania: 23
Streszczenie: In the last years the interest in new synthetic and natural titanosilicates has increased. Due to the tunable pore diameter and other distinct characteristics, these materials can be utilized for commercially important separations of gas mixtures of similar size molecules, catalysts and removal of radioactive elements from nuclear waste. However, from the point of view of industrial synthesis, scale-up complicated technology and high cost of the agents are limiting factors, hence it is of interest to research new materials to replace expensive pure titanium precursors and stimulate studies to develop an efficient technology. The results of synthesis of the new nanoporous titanosilicates using cost efficient ammonium oxysulphotitanate are presented. By carefully selecting the titanium sources and synthesis parameters, it is possible to obtain titanosilicate Na2K(Ti4(OH)(SiO4)3 analogue of the mineral pharmacosiderite.
Słowa kluczowe: titanosilicate, synthesis, ammonium oxysulphotitanate, ets-4, ets-10, ivanyukite
Cytowanie artykułu: Anatoly I. Nikolaev, Lidia G. Gerasimova, Marina V. Maslova, Daria V. Spiridonova, Victor N. Yakovenchuk, Gregory Yu. Ivanyuk. SYNTHESIS AND PROPERTIES OF NANO-POROUS TITANOSILICATES. Journal of International Scientific Publications: Materials, Methods & Technologies 6, 25-34 (2012). https://www.scientific-publications.net/en/article/1003189/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
