DETERMINATION OF DIRECT COOLING CONDITIONS OF UHSS DROP FORGINGS
Piotr Skubisz
Strony: 153-162
Opublikowano: 1 Jan 2012
Wyświetlenia: 262
Pobrania: 21
Streszczenie: Results of direct cooling tests of drop forgings made of UHSS steel grade 4130 are presented. The studies include determination of forging and direct cooling conditions in aspect of realization of thermomechanical treatment directly after forging oriented at producing required microstructure and mechanical properties. For estimation of forging temperature and most favourable cycle of cooling, experimental tests of forced-air cooling in laboratory conditions were carried out with application of controlled-cooling line, which unlike the most of the industrial conveyor, is facilitated with automatically controlled system. The results have been implemented into industrial forging cycle, conducted with use of the same portable cooling device. Obtained samples underwent examination with metallographic work and tensile testing, which confirmed possibility of direct cooling with forced air and allowed formulation of guidelines for improvement of effectiveness of the cost-effective thermomechanical treatment.
Słowa kluczowe: drop forgings, direct cooling, microalloyed steel, ultra-high strength steel
Cytowanie artykułu: Piotr Skubisz. DETERMINATION OF DIRECT COOLING CONDITIONS OF UHSS DROP FORGINGS. Journal of International Scientific Publications: Materials, Methods & Technologies 6, 153-162 (2012). https://www.scientific-publications.net/en/article/1003203/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
