REGULATIONOF THE OUTPUT POWER AT THE RESONANT CONVERTER
Goce G. Stefanov, Ljupco V. Karadzinov, Vasilija J. Sarac
Strony: 13-23
Opublikowano: 1 Jan 2011
Wyświetlenia: 192
Pobrania: 12
Streszczenie: In this paper a method for regulating an alternating current voltage source with pair of IGBT transistor’s modules, in a full bridge configuration with series resonant converter is given. With the developed method a solution isobtained which can regulate the phase difference between output voltage and current through the inductor, in order to maintain maximum output power. Control electronic via feedback signals regulates the energy transfer to the tank by changing the pulse width of signals which are used as inputs to the gates of the IGBTs. By increasing or decreasing the pulse width transmitted to the various gates of the IGBT the energy transfer to the tank is increased or decreased . PowerSim simulations program is used for development of controlling methodology. Developed method is practically implemented in a prototype of the device for phase control of resonantconverterwithvariable the resonantload.
Słowa kluczowe: pulse width method, phase regulation, power converter
Cytowanie artykułu: Goce G. Stefanov, Ljupco V. Karadzinov, Vasilija J. Sarac. REGULATIONOF THE OUTPUT POWER AT THE RESONANT CONVERTER. Journal of International Scientific Publications: Materials, Methods & Technologies 5, 13-23 (2011). https://www.scientific-publications.net/en/article/1003316/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
