INVESTIGATION OF VIBRATIONS ACTING ON THE COMPARATOR CARRIAGE
Arturas Kilikevichus, Vladas Vekteris
Strony: 11-23
Opublikowano: 1 Jan 2008
Wyświetlenia: 105
Streszczenie: Oscillations of the comparator, which is used for the dynamic calibration of long optical line scales, are analyzed in the paper. The accuracy of determination of the position of optical lines on the scale depends on the velocity of the carriage, which transports the microscope with a CCD camera in relation to the line scale. Oscillations influence the velocity equability, its value, and at the same time the error compo measuring. The base part of the comparator is acted upon by external excitations which come through the foundation and supports, also due to natural frequencies of the comparator set. It is shown in the work that vibration surroundings acting on the comparator have a random character and correspond to the criteria of the normal (Gauss) distribution. It is proved experimentally that preaching amplitudes of measured components of vertical and horizontal oscillations influence the stability of the carriage movement which causes the error of measuring.
Słowa kluczowe: comparator, dynamic calibration, vibration, carriage, measuring, calibrated scale
Cytowanie artykułu: Arturas Kilikevichus, Vladas Vekteris. INVESTIGATION OF VIBRATIONS ACTING ON THE COMPARATOR CARRIAGE. Journal of International Scientific Publications: Materials, Methods & Technologies 2, 11-23 (2008). https://www.scientific-publications.net/en/article/1003512/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
