ACRYLIC ACID GRAFTED PDMS PRELIMINARY ACTIVATED BY AR+ BEAM PLASMA AND CELL OBSERVATION
A. Kostadinova, I. Keranov, N. Zaekov
Strony: 19-23
Opublikowano: 1 Jan 2007
Wyświetlenia: 87
Streszczenie: Plasma based Ar+ beam performed in RF (13.56 MHz) low-pressure (200 mTorr) glow discharge (at 100 W, 1200 W and 2500 W) with a serial capacitance was employed for surface modification of poly(dimethylsiloxane) (PDMS) aimedat improvement of its interactions with living cells. The presence of a serial capacitance ensures arise of an ion-flowinside the plasma volume directed toward the treated sample and the vary of the discharge power ensures varied density of the ion-flowThe initial adhesion of human fibroblast cells was studied on the described above plasma based Ar+beam modified and acrylic acid (AA) grafted or not fibronectin (FN) pre-coated or bare surfaces. The cell response seems to be related with the peculiar structure and wettability of the modified PDMS surface layerafter plasma based Ar+ beam treatment followed or not by AA grafting.
Słowa kluczowe: biomaterials, surface treatment of pdms, plasma based ar+ beam, acrylic acid grafting, fibroblast cells
Cytowanie artykułu: A. Kostadinova, I. Keranov, N. Zaekov. ACRYLIC ACID GRAFTED PDMS PRELIMINARY ACTIVATED BY AR+ BEAM PLASMA AND CELL OBSERVATION. Journal of International Scientific Publications: Materials, Methods & Technologies 1, 19-23 (2007). https://www.scientific-publications.net/en/article/1003536/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
