COMPARISON OF PHOTOVOLTAIC PARAMETERS OF CDSE QD AND SAFRANIN DYE BASED SOLAR CELL
W. A. Farooq, Amanullah Fatehmulla, M. Aslam, M. Atif, S. A. Mansoor, F. Yakuphanoglu, I. S. Yahia
Pagini: 667-675
Publicat: 2 Jun 2014
Vizualizări: 4,013
Descărcări: 1,152
Rezumat: In the present investigation, comparison between photovoltaic parameters of FTO/TiO2/CdSe.QDs/Pt/FTO and FTO/TiO2/Safaranin Dye/Pt/FTO are presented. Photo electrodes are prepared on FTO coated glass with three layers; titanium isopropoxide with spin coating, TiO2 nano-crystalline paste using doctor-blade technique, and a thin layer of titanium chloride with spin coating. Counter electrodes are prepared with sputtering on FTO. CdSe quantum dots are synthesized in three neck flask using trioctylphosphine oxide. Higher photovoltages Voc in QDSSC has been observed whereas higher photocurrents have been measured in DSSC solar cell. At 100 mW/cm-2 power density, maximum power is achieved in Safranin dye based solar cell. The capacitance-voltage characteristics of the cell were measured in a wide range of frequencies. It shows a behavior from positive to negative capacitance due to injection of electrons from FTO electrode into TiO2.
Cuvinte cheie: quantum dots, solar cells, photo electrode, electrolyte, impedance spectroscopy
Citează acest articol: W. A. Farooq, Amanullah Fatehmulla, M. Aslam, M. Atif, S. A. Mansoor, F. Yakuphanoglu, I. S. Yahia. COMPARISON OF PHOTOVOLTAIC PARAMETERS OF CDSE QD AND SAFRANIN DYE BASED SOLAR CELL. Journal of International Scientific Publications: Materials, Methods & Technologies 8, 667-675 (2014). https://www.scientific-publications.net/en/article/1000218/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
