DETERMINING THE TENSILE STRENGTH AND OTHER PROPERTIES OF EUROPEAN BEECH (FAGUS SYLVATICA) WOOD IMPREGNATED WITH RAPESEED OIL
Konstantinos V. Kakavas, Dimitrios Birbilis, Thomas Tsioukas
Pagini: 819-823
Publicat: 15 Dec 2014
Vizualizări: 3,223
Descărcări: 961
Rezumat: European beech (Fagus sylvatica) is one of the most important Greek forest species, as it produces a great amount commercial wood valuable for exterior use. The purpose of this study was to investigate the possibility of using natural oil (rape oil) to improve beech wood properties (dimensional stability and duration). Specifically, the objective of this study was to determine the tensile strength of lap joints, water absorption and swelling of glued European beech (Fagus sylvatica) wood impregnated with rapeseed oil. Rape oil retention ranged between 146,51 and 294,20 kg/m3. The impregnated specimens had an absorption of about 20%, while the untreated near 60%. The rate of swelling was also decreased in impregnated specimens. The impregnated specimens had a little lower tensile strength than the untreated ones mostly when glued with polyurethane (PU).
Cuvinte cheie: european beech, impregnation, rape oil, swelling, tensile strength, wood modification
Citează acest articol: Konstantinos V. Kakavas, Dimitrios Birbilis, Thomas Tsioukas. DETERMINING THE TENSILE STRENGTH AND OTHER PROPERTIES OF EUROPEAN BEECH (FAGUS SYLVATICA) WOOD IMPREGNATED WITH RAPESEED OIL. Journal of International Scientific Publications: Materials, Methods & Technologies 8, 819-823 (2014). https://www.scientific-publications.net/en/article/1000628/
Înapoi la cuprinsul volumului
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
