PREDICTION THE EFFECTS OF BLAST FURNACE SLAG AND WASTE TIRE RUBBER POWDER ON THE SETTING TIME OF PORTLAND CEMENT WITH FUZZY LOGIC
Yilmaz Kocak, Eyyup Gulbandilar, Lale Alpaslan
Pagini: 298-307
Publicat: 31 May 2015
Vizualizări: 3,380
Descărcări: 876
Rezumat: In the present study, the effects of the cements formed by substituting Portland Cement (PC) with different ratios of blast furnace slag and waste tire rubber powder on initial and final setting times are investigated. To this purpose, Portland cement replaced with blast furnace slag as a ratio of its weight of 0, 5, 10, 15 and 20%, waste tire rubber powder as a ratio of its weight of 0, 2.5, 5%, both blast furnace slag and waste tire rubber powder as a ratio of its weight of 2.5+2.5%, 7.5+2.5%, 5+5%, 10+5% and 15+5%. By this procedure, twelve different mixtures were prepared and effect of cement was investigated on the initial and final setting time. According to the results obtained in the initial and final setting times all the mixing ratio of the prolonged period of time was determined. Also, by using Fuzzy Logic method, prediction model was formed based on the quantity of blast furnace slag and waste tire rubber powder to predict the initial and final setting times of cement. The experimental results are compared with the fuzzy logic results and the correlation coefficients for the initial and final setting time are found 0.93 and 0.95, respectively. These results show that the developed model can be successfully applied in the cement and concrete industry.
Cuvinte cheie: fuzzy logic, portland cement, blast furnace slag, waste tire rubber powder, setting time
Citează acest articol: Yilmaz Kocak, Eyyup Gulbandilar, Lale Alpaslan. PREDICTION THE EFFECTS OF BLAST FURNACE SLAG AND WASTE TIRE RUBBER POWDER ON THE SETTING TIME OF PORTLAND CEMENT WITH FUZZY LOGIC. Journal of International Scientific Publications: Materials, Methods & Technologies 9, 298-307 (2015). https://www.scientific-publications.net/en/article/1000777/
Înapoi la cuprinsul volumului
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
