SYNTHESIS OF COBALT FERRITE MODIFIERS OF CARBON PASTE ELECTRODE
D. Jovanović, R. Karkalić, D. Cucić, M. Lakić, V. Maslak, S. Pavić-Vidić, D. Stanković, A. S. Nikolić
Pagini: 137-143
Publicat: 1 Jul 2016
Vizualizări: 2,269
Descărcări: 486
Rezumat: The paper presents a new type of modified glassy carbon paste electrode with different Co- ferrites. First part of this work was the preparation of ferrites by five different methods such as hydrothermal, ultrasound and microwave-assisted hydrothermal, mechanochemical and sol-gel synthesis. Ferrite nanoparticles were characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD). They were used for preparation new modified glassy carbon paste electrode (CoFeMGCPE). The electrode was used for determination of nanomolar level of copper ions in waste waters using electrochemical methods such as differential pulse anodic stripping voltammetry, DPASV. A significant increase in current was achieved at the modified electrode in comparison with the bare glassy carbon paste electrode. Detection limit for the proposed electrode was 30nM Cu when percentage of modifier was 3%, pH 4.5, deposition potential -0.3 V and deposition time 4min. This electrode was successfully applied for determination of copper ions in waste water without any pre-treatment.
Cuvinte cheie: cobalt ferrite, copper, modified electrode, glassy carbon paste, electrochemistry
Citează acest articol: D. Jovanović, R. Karkalić, D. Cucić, M. Lakić, V. Maslak, S. Pavić-Vidić, D. Stanković, A. S. Nikolić. SYNTHESIS OF COBALT FERRITE MODIFIERS OF CARBON PASTE ELECTRODE. Journal of International Scientific Publications: Materials, Methods & Technologies 10, 137-143 (2016). https://www.scientific-publications.net/en/article/1001136/
Înapoi la cuprinsul volumului
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
