THERMAL EFFECT ON THE UNIAXIAL TENSILE PROPERTIES AND STRUCTURE OF POLY (VINYL ALCOHOL) FILMS
Baki Aksakal, Önder Yargi
Pagini: 273-282
Publicat: 1 Jul 2016
Vizualizări: 2,332
Descărcări: 498
Rezumat: Influence of heating or annealing at different temperatures from 25 to 140 °C on the uniaxial tensile properties of polyvinyl alcohol (PVA) thin films was investigated by using tensile testing method. It was observed that especially the shape of initial part (up to 10% strain) of the stress-strain curve changed significantly which indicates the formation of a transition point at a low strain value of around 1-2% strain with increasing anneal temperature. Besides, initial or Young’s modulus increased from 0.26 GPa to around 1 GPa as the temperature increased from 25 °C to around 100 °C and then it decreased slightly down to around 0.7 GPa. Ultimate tensile stress increased significantly from around 16 to 39 MPa. Moreover, toughness of the PVA films were improved from around 144*104 to 3942*104 J/m3 for the anneal temperatures from 80 to 130 °C. By using the FT-IR/ATR spectral results, the increase in tensile strength and toughness is assumed to be due to increase in the degree of crystallization and absorbance ratio of hydrogen bonded OH groups, that is, the increase in the more ordered structural units and reformation and/or breakage of intra- and inter-molecular hydrogen bonds during heating process.
Cuvinte cheie: poly, vinyl alcohol, tensile properties, thermal effect, young’s modulus, hydrogen bond
Citează acest articol: Baki Aksakal, Önder Yargi. THERMAL EFFECT ON THE UNIAXIAL TENSILE PROPERTIES AND STRUCTURE OF POLY (VINYL ALCOHOL) FILMS. Journal of International Scientific Publications: Materials, Methods & Technologies 10, 273-282 (2016). https://www.scientific-publications.net/en/article/1001150/
Înapoi la cuprinsul volumului
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
