SINTERING BEHAVIOR AND MICROSTRUCTURAL EVALUATION OF MGO-DOPED α-AL2O3
Ali Özer, L. Cenk Kumruoğlu, Mevlüt Çelik, Emircan Çağlar, Kerim Emre Öksüz
Pagini: 367-373
Publicat: 10 Jul 2016
Vizualizări: 2,309
Descărcări: 446
Rezumat: There have been widespread interests in recent decades in porous ceramics owing to their specific properties, such as low bulk density, low specific heat, low thermal conductivity and high specific surface area. Alumina has been one of the first developed advanced ceramics to be used in load bearing applications as orthopedic implants. The properties of α-Al2O3 can be modified by introducing a second suitable metal oxide to form a composite oxide. Among various metal oxides MgO is considered as a promising metal oxide which can modify the properties of alumina in the α-Al2O3-MgO mixed oxides by grain growth inhibition due to the strong basic characteristics of MgO. In this work, porous α-Al2O3 – MgO alumina-based ceramics were fabricated by a tape casting method and powder metallurgy technique. MgO-doped α-Al2O3 ceramics sintered at 1400°C for 2-4-6 h in air atmosphere. The effect of sintering time on the porosity, density and shrinkage properties of samples were investigated. The sintering behavior, surface morphology, elemental distribution and phase evaluation of the composite ceramics were evaluated by SEM-EDX and XRD, respectively.
Cuvinte cheie: α-al2o3, porous ceramics, sem-edx, grain growth inhibition
Citează acest articol: Ali Özer, L. Cenk Kumruoğlu, Mevlüt Çelik, Emircan Çağlar, Kerim Emre Öksüz. SINTERING BEHAVIOR AND MICROSTRUCTURAL EVALUATION OF MGO-DOPED α-AL2O3. Journal of International Scientific Publications: Materials, Methods & Technologies 10, 367-373 (2016). https://www.scientific-publications.net/en/article/1001160/
Înapoi la cuprinsul volumului
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
