STUDY OF THE SURFACE FINISH WHEN TURNING HARDENED STEELS
Yusuf Şahin, Senai Yalcinkaya
Pagini: 307-316
Publicat: 29 Jul 2017
Vizualizări: 2,639
Descărcări: 439
Citations: 3 (Google Scholar)
Rezumat: This study concentrates on the optimization of process parameters for surface roughness when turning hardened bearing steels using coated ceramic cutting tools and developed the multiple regression models for the surface roughness based on the factors cutting speed, feed rate, depth of cut and cutting fluid. The experimental results indicated that the feed rate was found to be a dominant factor on the surface roughness of Ra and Rz, but the other factors did not indicate the significant effect. In addition, optimal testing parameter for the surface roughness was determined. Average surface roughness obtained was about 0.79 and 4.102 μm for Ra and Rz, respectively, when machining the hardened steels. Furthermore, ANOVA revealed that the feed rate exerted a largest effect on the surface finish at contribution of 64.03%, followed by the depth of cut at 10.47%, respectively.
Cuvinte cheie: bearing steel, cutting tool, surface finish, feed rate, depth of cut, lubrication, factorial design
Citează acest articol: Yusuf Şahin, Senai Yalcinkaya. STUDY OF THE SURFACE FINISH WHEN TURNING HARDENED STEELS. Journal of International Scientific Publications: Materials, Methods & Technologies 11, 307-316 (2017). https://www.scientific-publications.net/en/article/1001476/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
