PROTECTIVE PROPERTIES OF ZN-MN COMPOSITE COATINGS
N. Boshkova, L. Lutov, N. Boshkov
Pagini: 266-274
Publicat: 6 Sep 2018
Vizualizări: 1,917
Descărcări: 264
Rezumat: Galvanic and nanocomposite Zn-Mn(11 wt.%) alloy coatings are obtained from a simple sulfate bath at electrodeposition conditions. The nanocomposite coatings contain stabilized polymeric micelles – SPM - the latter added to the electrolytic bath in concentration of 0,1 wt.%. Some of the coatings are additionally treated in Cr3+-based solution for obtaining of surface conversion layer. The protective ability of the coatings is evaluated in a model corrosion medium of free aerated 3% NaCl solution by potentiodynamic polarization curves and polarization resistance measurements. The surface morphology of the coatings is investigated by SEM images. The results show the better corrosion resistance and greater protective ability of the nanocomposite Zn-Mn alloy coatings compared to the ordinary ones. The influence of the Cr3+-based conversion layers on the coating characteristics is also commented and discussed.
Cuvinte cheie: zn-mn, nanocomposites, corrosion, conversion cr(iii) layers, polarization
Citează acest articol: N. Boshkova, L. Lutov, N. Boshkov. PROTECTIVE PROPERTIES OF ZN-MN COMPOSITE COATINGS. Journal of International Scientific Publications: Materials, Methods & Technologies 12, 266-274 (2018). https://www.scientific-publications.net/en/article/1001704/
Înapoi la cuprinsul volumului
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
