THE EFFECT OF SELECTIVE LASER MELTING TECHNOLOGY ON THE DEVELOPMENT OF THE STRUCTURE OF SAMPLES MADE FROM WC-CO POWDER
David Bricin, Andrea Elmanova, Antonin Kriz
Pagini: 38-47
Publicat: 18 Sep 2019
Vizualizări: 1,995
Descărcări: 190
Citations: 3 (OpenAlex)
Citations: 2 (Google Scholar)
Rezumat: The aim of this study was to analyse how changing the processing parameters of WC-Co powder affects its properties. The powder mixture properties were evaluated by technological tests firstly and then the results were than compared with properties of SD251 stainless steel powder which is commonly processed by the technology of selective laser melting (SLM). Different laser powers and laser spot feed rates were used for different samples. As a result, different values for the applied energy density Ev were obtained. The changes in the density, porosity and changes in the chemical and structural compositions of the printed samples were then evaluated using light and electron microscopy. This evaluation was supplemented by X-ray diffraction analysis of the phase composition and evaluation of mechanical properties using hardness testing. These experiments allowed us, for example, to determine the dependence of the density of the samples on the applied energy Ev. The maximum density of the printed samples was about 70%. In addition, metallographic analysis and X-ray diffraction analysis revealed the development of the eta phase in the specimens, and how changing the parameters changes the type and number of pores in the volume of the printed samples.
Cuvinte cheie: wc-co powder, slm technology, porosity, phase evolution
Citează acest articol: David Bricin, Andrea Elmanova, Antonin Kriz. THE EFFECT OF SELECTIVE LASER MELTING TECHNOLOGY ON THE DEVELOPMENT OF THE STRUCTURE OF SAMPLES MADE FROM WC-CO POWDER. Journal of International Scientific Publications: Materials, Methods & Technologies 13, 38-47 (2019). https://www.scientific-publications.net/en/article/1001877/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
