ELIMINATION OF IRREGULARITIES AND DEFECTS ON STEEL SURFACES THROUGH ELECTRO SPARK SURFACE MODIFICATION WITH ALUMINUM ALLOYS
Georgi D. Kostadinov, Todor G. Penyashki, Mikhail I. Petrzhik, Aleksandr E. Kudryashov, Mara K. Kandeva, Blagoj P. Elenov, Elena T. Dimitrova, Ivan En
Pagini: 106-116
Publicat: 12 Sep 2020
Vizualizări: 1,677
Descărcări: 180
Citations: 4 (Google Scholar)
Rezumat: The surface roughness of the parts has a significant influence on their performance properties and it is crucial for the friction force and wear of the bodies. Therefore, in practice it is often necessary to perform finishing treatment to reduce the macro, micro and meso- roughnesses - grinding, honing, lapping, polishing and more. In this study are examined the possibilities of reducing the roughness and the traces of the previous machining of steel surfaces by electro-spark deposition (ESD) with low-melting aluminium alloys. The roughness of the steel surfaces obtained after different milling modes after subsequent electrospark coating was investigated. Dense and uniform coatings with different surface microgeometry are obtained, which to a different extent erase the traces of the preceding processing. The examination of tribological characteristics showed a significant increase in the wear resistance of the coated surfaces. The process parameters and materials for ESD at which coated surfaces have simultaneously the lowest roughness and the highest wear resistance have been determined and optimized.
Cuvinte cheie: coatings, еlectrical spark deposition, electrodes, wear resistance, roughness
Citează acest articol: Georgi D. Kostadinov, Todor G. Penyashki, Mikhail I. Petrzhik, Aleksandr E. Kudryashov, Mara K. Kandeva, Blagoj P. Elenov, Elena T. Dimitrova, Ivan En. ELIMINATION OF IRREGULARITIES AND DEFECTS ON STEEL SURFACES THROUGH ELECTRO SPARK SURFACE MODIFICATION WITH ALUMINUM ALLOYS. Journal of International Scientific Publications: Materials, Methods & Technologies 14, 106-116 (2020). https://www.scientific-publications.net/en/article/1002052/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
