GEOMETRIC CHARACTERISTICS, COMPOSITION AND STRUCTURE OF COATINGS OF WC-TIB2-B4C- NI-CR-B-SI-C ELECTRODES FORMED ON 3D PRINTING TITANIUM AND STEELS BY CONTACTLESS ELECTROSPARK DEPOSITION
G. Kostadinov, T. Penyashki, A. Nikolov, R. Dimitrova, V. Kamburov, M. I. Petrzhik, B. Elenov, I. Mortev, E. Dimitrova
Pagini: 160-171
Publicat: 16 Nov 2022
Vizualizări: 1,249
Descărcări: 108
Citations: 12 (OpenAlex)
Citations: 5 (Google Scholar)
Rezumat: The object of the present work are the surface properties of technical titanium produced by 3D printing - Direct Metal Laser Sintering (DMLS) with subsequent treatment by local electrospark deposition with a rotating electrode (LESD). The layering was performed with electrodes of multicomponent hard alloys based on WC with additives from B4C, TiB2 and Ni-Cr-B-Si-C and of AlSi alloys. The influence of the LESD process parameters on the roughness, thickness, composition and structure of the coatings was studied by profilometric, metallographic, XRD, SEM and EDS methods. High-density coatings with different roughness and thickness have been obtained, which can be changed by changing the LESD modes in the range Ra=1.25÷3.5μm, δ=6÷20μm and microhardness 9÷14.0 GPa. Friction tests have shown that the wear of coated surfaces is up to 4 times lower than uncoated. On the basis of the experimental data, appropriate process parameters and electrodes have been determined, allowing to obtain coatings with purposeful synthesized of new phases and crystal-amorphous structures, and with predetermined thickness and roughness and higher hardness, and wear resistance than those of substrates.
Cuvinte cheie: 3d printing, direct metal laser sintering dmls, local electrospark deposition - lesd, titanium alloys, roughness, microhardness, wear, wear resistance
Citează acest articol: G. Kostadinov, T. Penyashki, A. Nikolov, R. Dimitrova, V. Kamburov, M. I. Petrzhik, B. Elenov, I. Mortev, E. Dimitrova. GEOMETRIC CHARACTERISTICS, COMPOSITION AND STRUCTURE OF COATINGS OF WC-TIB2-B4C- NI-CR-B-SI-C ELECTRODES FORMED ON 3D PRINTING TITANIUM AND STEELS BY CONTACTLESS ELECTROSPARK DEPOSITION. Journal of International Scientific Publications: Materials, Methods & Technologies 16, 160-171 (2022). https://www.scientific-publications.net/en/article/1002518/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
