RESEARCH ON ELECTRON BEAM WELDING OF CR-MO STEELS
Daniel Drimal, Frantisek Kolenic, Tomas Fodrek, Rastislav Sekerka
Pagini: 19-31
Publicat: 17 Dec 2024
DOI: 10.62991/MMT1996572809
Vizualizări: 269
Descărcări: 41
Rezumat: The paper presents a comprehensive approach to the welding of CrMo hardenable steels. W. No. 1.7225 (42CrMo4) and W. No. 1.7325 (25MoCr4) using the advantages of electron beam technology. The experiments were carried out on a modified electron beam welding device of the PZ ELZA UNI 2G type with an acceleration voltage of up to 60 kV and a maximum power of up to 7 kW. The research was focused on the design and optimization of the preheating of welded parts to suppress the formation of cold cracks. Preheating was performed with a defocused and deflected electron beam before the actual welding process. Preheating parameters were designed based on theoretical calculations and verified in the process. The temperature of the weldment was monitored during preheating using a thermocouple, and the measured values were compared with the predicted ones. The achieved properties of the welded joints are presented in terms of the achieved structure and hardness.
Cuvinte cheie: electron beam welding, cr-mo steels, carbon equivalent, cold crack, preheating
Citează acest articol: Daniel Drimal, Frantisek Kolenic, Tomas Fodrek, Rastislav Sekerka. RESEARCH ON ELECTRON BEAM WELDING OF CR-MO STEELS. Journal of International Scientific Publications: Materials, Methods & Technologies 18, 19-31 (2024). https://doi.org/10.62991/MMT1996572809
Înapoi la cuprinsul volumului
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
