NANOSTRUCTURED TIN OXIDE FOR GAS SENSOR APPLICATION
Sergiy M. Malovanyy, Olga I. Milovanova, Edward V. Panov
Pagini: 373-381
Publicat: 1 Jan 2013
Vizualizări: 283
Descărcări: 19
Rezumat: Tin dioxide (SnO2) is the most important material for use in gas sensing. The performance of SnO2 sensor is directly related to the tin oxide particle size and compositional characteristics. In the present study, a method for the preparation of pure or chemically modified SnO2 nano-powders by chemical interaction in molten salts is presented. The molten alkali metal nitrates NaNO3 and KNO3 were used as liquid reaction medium. The oxides prepared in molten salts consist of small particles (~ 6-10 nm) with narrow size distribution. The particles are united into soft associates with an average size of 200 – 300nm. It was found that SnO2 nano-powders have good stability against recrystallization process at 0 elevated temperatures up to 650 C. The sensors were fabricated using thick film technology and tested for ethanol and acetone vapor detection. SnO2 film exhibits high sensitivity to vapors at a low o operating temperature of 200 C. Preliminary results indicate potential application of the material for gas sensors.
Cuvinte cheie: gas sensors, tin dioxide nanopowder, molten salt synthesis, ethanol and dimethylketone
Citează acest articol: Sergiy M. Malovanyy, Olga I. Milovanova, Edward V. Panov. NANOSTRUCTURED TIN OXIDE FOR GAS SENSOR APPLICATION. Journal of International Scientific Publications: Materials, Methods & Technologies 7, 373-381 (2013). https://www.scientific-publications.net/en/article/1003118/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
