TECHNOLOGY OF OBTAINING NANOCOMPOSITES ON THE BASIS OF AN EPOXY BINDER AND A NANO-SIZED FILLER
Tatiana А. Brusentseva, Artem А. Filippov, Vyacheslav V. Syzrantsev
Pagini: 397-404
Publicat: 1 Jan 2013
Vizualizări: 328
Descărcări: 31
Rezumat: Epoxy resin has been modified with nano-SiO2 particles with diameters from 7 to 50 nm. The experiments show that the Young modulus and strength of nanosilica/epoxy resin-based composite increases up to 25 wt.% and then decreases after SiO2 content reaches 40 wt.%. A series of experiments has been conducted to study the effect of the size of the filler particles on fracture of composites materials.
Cuvinte cheie: epoxy resin, nanosilica, mechanical properties, modification
Citează acest articol: Tatiana А. Brusentseva, Artem А. Filippov, Vyacheslav V. Syzrantsev. TECHNOLOGY OF OBTAINING NANOCOMPOSITES ON THE BASIS OF AN EPOXY BINDER AND A NANO-SIZED FILLER. Journal of International Scientific Publications: Materials, Methods & Technologies 7, 397-404 (2013). https://www.scientific-publications.net/en/article/1003121/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
