STRUCTURE AND TRIBOGICAL PROPERTIES OF SURFACE FLUORINATED RUBBERS
V. Nazarov, M. Gagarin, V. Stolyarov, L. Mikhaleva
Pagini: 91-97
Publicat: 1 Jan 2012
Vizualizări: 278
Descărcări: 23
Rezumat: These studies concern the theoretical approaches to the improvement of antifriction properties of rubbers due to the optimum combination of methods of their surface modification. The model involves formation of a net related system of ingredients in the form of spherical particles with reduced friction coefficients, which is imbedded in the surface layer (including the modified one) of elastomer. There is shown, that in this case the areas of reduced and increased friction are initiated under a normal load, and these areas result in a significant change of a sliding friction overall coefficient of a surface- modified elastomer even under a low concentration of spherical particles. As an example was viewed a variant of realization of this model parallel with friction reduction by the surface fluorination of rubbers, such as rubber on the base of fluorine.
Cuvinte cheie: antifriction properties, friction coefficient, mathematic simulation, elastomer, metal
Citează acest articol: V. Nazarov, M. Gagarin, V. Stolyarov, L. Mikhaleva. STRUCTURE AND TRIBOGICAL PROPERTIES OF SURFACE FLUORINATED RUBBERS. Journal of International Scientific Publications: Materials, Methods & Technologies 6, 91-97 (2012). https://www.scientific-publications.net/en/article/1003196/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
