MAGNETIC ELASTOMERS BASED ON NANOSTRUCTURAL RE-3D-METAL-BORON AND IRON POWDER FILLERS WITH IMPRUVED ATTRACTION FORCE TO FERROMAGNETIC BODIES
Nikolai V. Kudrevatykh, Alexander P. Safronov, Sergey V. Andreev, Anatoliy N. Maslov, Anton V. Petrov, Aleksey S. Volegov, Kirill S. Mayura, Valeriy G. Maslennikov
Pagini: 98-114
Publicat: 1 Jan 2012
Vizualizări: 249
Descărcări: 27
Rezumat: In this work the magnetic and mechanical characteristics of magnetic elastomers named as hard and soft magnetic rubbers (HMR and SMR respectively) based on chloroprene, isoprene and butadiene- acrylonitrile rubber binders and nanostructural Rare-Earth-3d-Metal-Boron (MQP-B brand) and nanosized Į-Fe powder fillers have been studied in details, particularly their ability to be attracted (“adhered”) by ferromagnetic media, caused by the forces of magnetostatic interaction. Experimentally, the dependences of magnetic-force parameter – specific attraction force (F) of HMR to the surface of a steel sheet on: a) filler concentration; b) HMR thickness; c) magnetic poles density (number); d) SMR thickness closing the back magnetic poles on HMR surface; e) air gap width between HMR and steel sheet surfaces have been inferred. As the final result, the HMR 2 samples with F= 0.3-0.4 kg/cm at the thickness of 1.5-2.0 mm have been manufactured.
Cuvinte cheie: hard magnetic rubber, soft magnetic rubber, magnetic elastomers, nd-fe-b type
Citează acest articol: Nikolai V. Kudrevatykh, Alexander P. Safronov, Sergey V. Andreev, Anatoliy N. Maslov, Anton V. Petrov, Aleksey S. Volegov, Kirill S. Mayura, Valeriy G. Maslennikov. MAGNETIC ELASTOMERS BASED ON NANOSTRUCTURAL RE-3D-METAL-BORON AND IRON POWDER FILLERS WITH IMPRUVED ATTRACTION FORCE TO FERROMAGNETIC BODIES. Journal of International Scientific Publications: Materials, Methods & Technologies 6, 98-114 (2012). https://www.scientific-publications.net/en/article/1003197/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
