NEW TECHNOLOGY FOR PURIFICATION OF THE FLUE GAS FROM SULFUR DIOXIDE
Nikolai N. Kolev, Ljutzkan A. Ljutzkanov, Dimitar N. Kolev, Daniela B. Dzhonova-Atanasova, Elena N. Razkazova-Velkova,
Pagini: 375-382
Publicat: 1 Jan 2011
Vizualizări: 83
Rezumat: A new type of installation for SO2 removal from flue gas, producing high quality gypsum, is described. It ensures conditions at which the absorption process is practically gas side controlled with elimination of the resistance in the liquid phase boundary layer between gas and liquid and between the liquid and solid CaCO3 used as absorbent. This gives the possibility to calculate the absorption using data from literature, which eliminates the necessity of performing experiments for the given system and absorber construction. The new installation ensures high absorption degree, more than 99%, and provides optimal conditions for oxidation of the CaSO3 to gypsum, small height of the packing of the absorbers and low pressure drop. The installation is intended for removal of SO2 from the flue gases from small and middle capacity boilers, but with small changes can be used for big boilers too.
Cuvinte cheie: so2 removal, flue gas, new type of installation, slurry, gypsum, absorption degree, gas side controlled absorption, packed bed column, holpack packing
Citează acest articol: Nikolai N. Kolev, Ljutzkan A. Ljutzkanov, Dimitar N. Kolev, Daniela B. Dzhonova-Atanasova, Elena N. Razkazova-Velkova,. NEW TECHNOLOGY FOR PURIFICATION OF THE FLUE GAS FROM SULFUR DIOXIDE. Journal of International Scientific Publications: Materials, Methods & Technologies 5, 375-382 (2011). https://www.scientific-publications.net/en/article/1003314/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
