INFLUENCE OF INLET GAS FLOW VELOCITY ON THE OUTLET MALDISTRIBUTION COEFFICIENT OF GAS FLOW AFTER FOUR TYPES GAS DISTRIBUTION DEVICES
Tatyana St. Petrova
Pagini: 191-199
Publicat: 1 Jan 2011
Vizualizări: 72
Rezumat: Gas flow velocity profiles after four Gas Distribution Devices (GDD), mounted in column with diameter 0.5 m, have been measured experimentally. It is shown that the value of gas flow maldistribution factor (Mf) after each GDD depends on the initial gas flow velocity. The minimal values of Mf for every GDD at the investigated range of initial velocities have been determined. The lowest value for Mf (about 0.16) is reached for GDD №3 at lowest initial velocity (1.3 m/s) and for middle and highest one (1.6 and 2 m/s respectively) lowest Mf have been registered at GDD №4 (about 0.2 ÷ 0.22)
Cuvinte cheie: gas distribution device, velocity influence, gas maldistribution factor
Citează acest articol: Tatyana St. Petrova. INFLUENCE OF INLET GAS FLOW VELOCITY ON THE OUTLET MALDISTRIBUTION COEFFICIENT OF GAS FLOW AFTER FOUR TYPES GAS DISTRIBUTION DEVICES. Journal of International Scientific Publications: Materials, Methods & Technologies 5, 191-199 (2011). https://www.scientific-publications.net/en/article/1003331/
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
Submit Feedback
We value your input! Use this form to report any concerns or provide feedback on our published articles. All submissions will be kept confidential.
