THE STRUCTURAL AND PHASE STATE FORMED IN CONSTRUCTION TITANIUM ALLOY BYRADIAL FORGING
Galina V. Shlyakhova, Vladimir I. Danilov, Aleksandr S. Zavodchikov, Dina V. Orlova, Lev B. Zuev
Pagini: 254-262
Publicat: 1 Jan 2011
Vizualizări: 217
Descărcări: 36
Rezumat: The feasibility of rod manufacture from construction titanium alloy using radial forging on a high- duty machine SXK16 was investigated. The investigations were carried on for titanium rod samples using the methods of metallography, electron transmission microscophy and X-ray analysis. The results obtained are described herein. It is found that radial forging results in the formation of homogeneous fine-grained structure.Using radial forging process, high-quality items are produced. As-worked material has submicrocrystalline globular structure and an optimal α:β phase ratio. Besides, the technology is more cost-effective relative to conventional flow charts.
Cuvinte cheie: forging, titanium alloy, fine-grainstructure, substructure, pore size
Citează acest articol: Galina V. Shlyakhova, Vladimir I. Danilov, Aleksandr S. Zavodchikov, Dina V. Orlova, Lev B. Zuev. THE STRUCTURAL AND PHASE STATE FORMED IN CONSTRUCTION TITANIUM ALLOY BYRADIAL FORGING. Journal of International Scientific Publications: Materials, Methods & Technologies 5, 254-262 (2011). https://www.scientific-publications.net/en/article/1003335/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
