ANALYSIS OF IN-SITU RENEWAL TECHNOLOGY FOR THE BACKHOE BUCKET BORES
Toms Torims, Andris Ratkus, Janis Vilcans, Marcis Zarins, Aldis Rusa
Pagini: 270-289
Publicat: 1 Jan 2011
Vizualizări: 86
Rezumat: The overall aim of this article is to outline the progress of the research on how to develop an economically and scientifically justified backhoe buckets boreholes renewal technology by using mobile on-site technological equipment. Today the new mobile (in-situ) repair technologies are extensively used for the specialized equipment and machinery repairs. This repair technology is deployed directly on the damaged product: repair equipment is installed by using specialized centering devices. The bucket bores central axes are used as a reference base and damaged layer of material is removed mechanically applying turning operation. Subsequently the renewable surface is covered by new material layer by means of regular MIG/MAG welding. The last technological operation is final turning to the nominal diameter. Outlined renewal technology should meet high expectations – this necessitates in-depth and systematic study of pins and bores which are the most repaired objects of shovel bucket excavators. Therefore, research on established accuracy and technical requirements, both for the repaired unit and technological equipment in line with in-situ repair technology specifics, has been done. It was supported by impact analysis of the technological regimes to surface integrity with ambition to provide practical recommendations for the optimal choice of the technological regimes.
Cuvinte cheie: in-situ repair technology, surface integrity, technological parameters
Citează acest articol: Toms Torims, Andris Ratkus, Janis Vilcans, Marcis Zarins, Aldis Rusa. ANALYSIS OF IN-SITU RENEWAL TECHNOLOGY FOR THE BACKHOE BUCKET BORES. Journal of International Scientific Publications: Materials, Methods & Technologies 5, 270-289 (2011). https://www.scientific-publications.net/en/article/1003337/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
