PROPERTIES OF SILVER-TIN ALLOYS OBTAINED FROM PYROPHOSPHATE- CYANIDE ELECTROLYTES CONTAINING SALTS OF EDTA
Antoaneta T. Hrussanova, Ivan N. Krastev, Gesa Beck, Andreas Zielonka
Pagini: 4-15
Publicat: 1 Jan 2010
Vizualizări: 271
Descărcări: 42
Rezumat: Silver-tin alloy coatings are electrodeposited from a newly developed EDTA containing cyanide- pyrophosphate electrolyte and some properties of the obtained coatings, such as microhardness, internal stress, abrasion resistance, plug-in forces and electrical contact resistance depending upon the applied current density or the tin content of the alloy, respectively, are investigated. The co- deposition of tin leads to the change of the tensile stress of pure silver coatings to compressive stress of the formed solid solution of the alloy and to almost stress free coatings at high current densities. The microhardness runs over a maximum at current densities, where the silver lattice is saturated with tin and phase heterogeneous coatings are deposited. The abrasion resistance diminishes at increased tin content, and the changes of the electrical contact resistance are in the opposite direction. The measured plug-in forces show the lubricating properties of the alloy coatings.
Cuvinte cheie: silver-tin alloys, electrodeposition, electrolytes, spatio-temporal structures
Citează acest articol: Antoaneta T. Hrussanova, Ivan N. Krastev, Gesa Beck, Andreas Zielonka. PROPERTIES OF SILVER-TIN ALLOYS OBTAINED FROM PYROPHOSPHATE- CYANIDE ELECTROLYTES CONTAINING SALTS OF EDTA. Journal of International Scientific Publications: Materials, Methods & Technologies 4, 4-15 (2010). https://www.scientific-publications.net/en/article/1003361/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
