ELECTROCHEMICAL OBTAINING OF ALLOY COATINGS ZN-FE-P FROM SULFATE ELECTROLYTES
Vasil D. Bachvarov, Miglena T. Peshova, Stefana. D. Vitkova, Nikolai S. Boshkov
Pagini: 481-497
Publicat: 1 Jan 2010
Vizualizări: 191
Descărcări: 17
Rezumat: The present work investigates the galvanostatic obtaining of alloy coatings Zn-Fe-P from sulfate electrolytes. Cyclic voltaamogramms show that the co-deposition of zinc with phosphorus is possible only in the presence of iron ions in the electrolytic bath. The including of P in the coating occurs at iron amounts higher than 9 wt% - higher iron concentration leads to higher phosphorus amounts. Fine crystal surface structure with spherical agglomerates characteristic for the amorphous layers is obtained even of 0,5 - 2 wt% phosphorus. Entirely amorphous and uniform coatings can be practically obtained only at very thin films. Potentiodynamic curves in 1N Na2SO4 show that Zn-Fe-P alloy containing up to 2 wt% P and 20 wt% Fe demonstrate better corrosion characteristics compared to Zn-Fe coatings.
Cuvinte cheie: electrodeposition, zn-fe-p alloys, cyclic voltammetry
Citează acest articol: Vasil D. Bachvarov, Miglena T. Peshova, Stefana. D. Vitkova, Nikolai S. Boshkov. ELECTROCHEMICAL OBTAINING OF ALLOY COATINGS ZN-FE-P FROM SULFATE ELECTROLYTES. Journal of International Scientific Publications: Materials, Methods & Technologies 4, 481-497 (2010). https://www.scientific-publications.net/en/article/1003399/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
