ON THE MODELING OF MOISTURE ADSORPTION IN A PACKED BED
Petya G. Popova, Christo B. Boyadjiev
Pagini: 105-111
Publicat: 1 Jan 2010
Vizualizări: 265
Descărcări: 51
Rezumat: This paper presents a mathematical model which describes process of moisture transfer from the adsorbent bed and air filtrated through the bed. The model of the packed bed column takes into consideration mass transfer in the bed as well as water diffusion and adsorption in a new composite sorbent “CaCl2/alumina”. The model is applied to describe evolution of vapor concentration at the exit of experimental unit for regenerating moisture in ventilation systems, which has recently been suggested, build and tested. Sorption equilibrium of water vapor on the new sorbent has been studied to be used as input parameter in the model. Good agreement between experimental and calculation data demonstrated that the model adequately reflects main physical and chemical features of the regeneration processes. Hence, it can be used for modeling a scale-up effect and for magnification of the unit from laboratory to larger size, e.g. single room, family house and large residential buildings.
Cuvinte cheie: mathematical modeling, adsorption, mass transfer, parameter identification
Citează acest articol: Petya G. Popova, Christo B. Boyadjiev. ON THE MODELING OF MOISTURE ADSORPTION IN A PACKED BED. Journal of International Scientific Publications: Materials, Methods & Technologies 4, 105-111 (2010). https://www.scientific-publications.net/en/article/1003412/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
