ICP-MS DETERMINATION OF TRACE ELEMENT IN VEGETABLE MODIFICATE FATS
Galya K. Toncheva, Deana L. Georgieva, Ginka A. Antova, Pavel Merdzhanov
Страницы: 148-157
Опубликовано: 1 Jun 2014
Просмотры: 5,012
Загрузки: 1,945
Citations: 3 (Google Scholar)
Аннотация: Tree types of hydrogenated fats which are used in the industry were tested. The initial trace element content was determined and also its changes during the heat treatment due to short-term or longer stay of the fats in the production container from chrome-nickel steel. Using inductively-coupled plasma-mass spectrometry (ICP MS) the total quantity of the selected metals in the fats was determined: Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ag, Sn and Pb. Was investigated the migration kinetics of Fe and Cr in coating and filling fats and fatty acid composition of the fats at the beginning and end of the observation. Unacceptable changes were not found in the organoleptic characteristics of the fats, resulting from the migration of metals. The amount of the tested toxic metals does not exceed the limit value. An exception is the increased amount of copper in two and nickel in the tree types of fats.
Ключевые слова: icp-ms, trace element, hydrogenated fats
Цитировать эту статью: Galya K. Toncheva, Deana L. Georgieva, Ginka A. Antova, Pavel Merdzhanov. ICP-MS DETERMINATION OF TRACE ELEMENT IN VEGETABLE MODIFICATE FATS. Journal of International Scientific Publications: Agriculture & Food 2, 148-157 (2014). https://www.scientific-publications.net/en/article/1000021/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
