HYDROPHILIZATION OF UNSATURATED POLYESTER RESIN WITH SULFUR, SODIUM HYDROXIDE AND WATER WITH A POSSIBILITY FOR ITS CURING IN THE PRESENCE OF WATER AS A SOLVENT
Rumyana Cherkezova, Philip Radenkov, Martin Radenkov, Tatyana Hristova, Kristina Zafirova, Nikola Todorov, Anton Popov
Страницы: 487-494
Опубликовано: 11 Jul 2016
Просмотры: 3,317
Загрузки: 567
Citations: 1 (Google Scholar)
Citations: 1 (OpenAlex)
Аннотация: This work is a continuation of previous research in formation of hydrophilized unsaturated polyester resin (HUPR). In that specific work, HUPR was produced by using sulfur (0.08 – 0.32 %), in the form of powder or dissolved in ethyl alcohol; combination of sodium hydroxide and sulfur; with or without solvent water. Kinetic dependencies of cross-linking with the content of the hydrophilizer sulfur were studied. IR spectroscopy analysis were conducted. The so-obtained cross-linking multicomponent system is a base for new materials with various applications.
Ключевые слова: unsaturated polyester resin, hydrophilization
Цитировать эту статью: Rumyana Cherkezova, Philip Radenkov, Martin Radenkov, Tatyana Hristova, Kristina Zafirova, Nikola Todorov, Anton Popov. HYDROPHILIZATION OF UNSATURATED POLYESTER RESIN WITH SULFUR, SODIUM HYDROXIDE AND WATER WITH A POSSIBILITY FOR ITS CURING IN THE PRESENCE OF WATER AS A SOLVENT. Journal of International Scientific Publications: Materials, Methods & Technologies 10, 487-494 (2016). https://www.scientific-publications.net/en/article/1001171/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
