CORROSION IN THE METALLIC SHELL OF HOT STOVES
Onidio Teixeira Pinto Junior, Vanessa de Freitas Cunha Lins
Страницы: 213-224
Опубликовано: 16 Nov 2022
Просмотры: 1,555
Загрузки: 188
Аннотация: This study proposes to verify and clarify the main corrosion mechanisms in industrial regenerators or hot stoves, widely used in the steel industry, indicating actions for its monitoring and control. The corrosion mechanisms in the upper parts, internally, are associated with the formation of siderite (FeCO3) and sulfur, which also favors stress corrosion and occurrence of cracks. Different corrosion mechanisms may be associated in the lower parts of the regenerators and may be accelerated by the presence of flue gas condensate and sulfur. Practical actions were proposed for the correct measurement and control of good operating conditions of the regenerators.
Ключевые слова: corrosion, hot stoves, sulfur, fuel gas quality
Цитировать эту статью: Onidio Teixeira Pinto Junior, Vanessa de Freitas Cunha Lins. CORROSION IN THE METALLIC SHELL OF HOT STOVES. Journal of International Scientific Publications: Materials, Methods & Technologies 16, 213-224 (2022). https://www.scientific-publications.net/en/article/1002524/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
