EFFECTIVENESS INCREASE THE LASER SINTERING OF POWDER MATERIAL
Saprykin Alexandr, Saprykina Nataly, Kuzmin Sergey
Страницы: 200-207
Опубликовано: 1 Jan 2010
Просмотры: 446
Загрузки: 61
Аннотация: During the research the following problem was raised: to define the pulse laser radiation influence value on different powder materials, as well as to define experimentally the thickness and width relations of a sintered powder layer from technological laser radiation parameters.
Ключевые слова: rapid prototyping, selective laser sintering, powder materials
Цитировать эту статью: Saprykin Alexandr, Saprykina Nataly, Kuzmin Sergey. EFFECTIVENESS INCREASE THE LASER SINTERING OF POWDER MATERIAL. Journal of International Scientific Publications: Materials, Methods & Technologies 4, 200-207 (2010). https://www.scientific-publications.net/en/article/1003419/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
