INFLUENCE OF ZINC IONS ON COPPER ELECTRODEPOSITION FROM SULPHURIC ACID ELECTROLYTES
Gyunver A. Hodjaoglu, Ivan S. Ivanov
Страницы: 493-500
Опубликовано: 1 Jan 2009
Просмотры: 416
Загрузки: 58
Аннотация: 2+ By means of potentiodynamic and galvanostatic methods the influence of H2SO4, Zn and hydroxyethylated-2-butyne-l, 4-diol (Ferasine) on the electroextraction of copper from sulphate 2+ electrolytes was studied. It was established that Zn -ions and organic additive Ferasine decreases the cathodic currents and quantities of deposited copper during scanning to different vertex potentials only in electrolytes containing sulphuric acid. Thus they inhibit the process of copper deposition. Dense and smooth copper coatings on with current efficiency higher than 95% are deposited when 2+ -3 -2 Cu concentration is higher than 5.0 g.dm and current density is in the range 0.5 ÷ 2.0 A.dm . More fine-grained coatings are obtained in the presence of H2SO4 and organic additive hydroxyethylated-2- butyne-l, 4-diol (Ferasine).
Ключевые слова: copper, cyclic voltammogram, deposition, electroextraction, zinc
Цитировать эту статью: Gyunver A. Hodjaoglu, Ivan S. Ivanov. INFLUENCE OF ZINC IONS ON COPPER ELECTRODEPOSITION FROM SULPHURIC ACID ELECTROLYTES. Journal of International Scientific Publications: Materials, Methods & Technologies 3, 493-500 (2009). https://www.scientific-publications.net/en/article/1003506/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
