A HIGH PRESSURE "CHECHEVITSA" (LENTIL)-TYPE MINI-CHAMBER MADE FROM SUPERHARD CERAMICS - BASED ON CUBIC BORON NITRIDE
Alexander A. Antanovich, Vladimir A. Sidorov, Alexander N. Pinyagin, Vladimir P. Filonenko
Pages: 62-67
Published: 2 Jun 2014
Views: 2,852
Downloads: 754
Abstract: This high-pressure chamber is based on the "anvil with recess" design - with a chamber diameter of 5 millimetres, and made from a superhard material based on cubic Boron Nitride. It has been specially developed to work in environments with pressures of up to 10 GPa.
Keywords: high-pressure device, bridgman anvils, lentil-type high-pressure device, superhard materials, cubic boron nitride
Cite this article: Alexander A. Antanovich, Vladimir A. Sidorov, Alexander N. Pinyagin, Vladimir P. Filonenko. A HIGH PRESSURE "CHECHEVITSA" (LENTIL)-TYPE MINI-CHAMBER MADE FROM SUPERHARD CERAMICS - BASED ON CUBIC BORON NITRIDE. Journal of International Scientific Publications: Materials, Methods & Technologies 8, 62-67 (2014). https://www.scientific-publications.net/en/article/1000147/
© 2023 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License http://creativecommons.org/licenses/by/3.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
