ABOUT CHANGES IN THE CHEMICAL COMPOSITION OF THE ELECTROLYTE IN THE PROCESS OF ELECTROLYTIC-PLASMA TREATMENT OF MATERIALS
Published: 31 May 2015
Abstract: There are the results of chemical analysis of the spent electrolyte (an aqueous solution of ammonium sulfate) after the process of electrolytic-plasma polishing stainless steel 12X18H10T (AISI 321) and steel 03H16N15M3 (AISI 316L), and chemical analysis of the solid residue produced after the electrolytic-plasma polishing. The results of these tests can more accurately describe the process model for electrolytic-plasma polishing.
Keywords: finishing, anode heating, polishing, electrolytic-plasma polishing, surface roughness, chemical analysis
Cite this article: Kalenchukova O. V., Nagula P. K., Tretinnikov D. L.. ABOUT CHANGES IN THE CHEMICAL COMPOSITION OF THE ELECTROLYTE IN THE PROCESS OF ELECTROLYTIC-PLASMA TREATMENT OF MATERIALS. Journal of International Scientific Publications: Materials, Methods & Technologies 9, 404-413 (2015). https://www.scientific-publications.net/en/article/1000788/
Download full text
Back to the contents of the volume
© 2021 The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License http://creativecommons.org/licenses/by/3.0/
, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.