DEGRADATION OF ARMOURED STEELS STRENGTH CHARACTERISTICS AFTER THEIR CUTTING BY WATER, PLASMA AND LASER BEAM
Ondrej Híreš, Igor Barényi, Peter Lipták, Martin Hládek
Pages: 242-248
Published: 1 Jan 2011
Views: 125
Abstract: The paper deals with changes in mechanical properties of selected ARMOX steels after their cutting with using of non-conventional cutting methods as are plasma, laser and water jet cutting. Three variants of ARMOX steels (440, 500 and 600) were tested by tensile strength test in order to acquire yield strength, tensile strength and elongation. Finally, the results are compared and evaluated to formulate conclusions.
Keywords: armour steels, armox, plasma cutting, laser cutting, water jet cutting, mechanical properties, tensile strength, yield strength
Cite this article: Ondrej Híreš, Igor Barényi, Peter Lipták, Martin Hládek. DEGRADATION OF ARMOURED STEELS STRENGTH CHARACTERISTICS AFTER THEIR CUTTING BY WATER, PLASMA AND LASER BEAM. Journal of International Scientific Publications: Materials, Methods & Technologies 5, 242-248 (2011). https://www.scientific-publications.net/en/article/1003302/
Back to the contents of the volume
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
