USE OF RECYCLED PLASTIC BAG WASTE IN THE CONCRETE
Youcef Ghernouti, Bahia Rabehi, Brahim Safi, Rabah Chaid
Strony: 480-487
Opublikowano: 2 Jun 2014
Wyświetlenia: 3,795
Pobrania: 19,577
Streszczenie: The aim of this study is to explore the possibility of re-cycling a plastic bag waste material (BBW) that is now produced in large quantities in the formulation of concrete as fine aggregate by substitution of a variable percentage of sand (10, 20, 30 and 40 %). The influence of the PBW on the fresh and hardened states properties of the concrete: workability, bulk density, ultrasonic pulse velocity testing, compressive and flexural strength of the different concretes, has been investigated and analyzed in comparison to the control concrete. The results showed that the use of PBW improves the workability and the density, reduces the compressive strength of concrete containing 10 and 20 % of waste by 10 to 24 % respectively, which have a mechanical strength acceptable for lightweight materials, remains always close to reference concrete (made without PBW). The results of this investigation consolidate the idea of the use of PBW in the field of construction, especially in the formulation of concrete.
Słowa kluczowe: waste, plastic, concrete, strength, valorization, density, workability
Cytowanie artykułu: Youcef Ghernouti, Bahia Rabehi, Brahim Safi, Rabah Chaid. USE OF RECYCLED PLASTIC BAG WASTE IN THE CONCRETE. Journal of International Scientific Publications: Materials, Methods & Technologies 8, 480-487 (2014). https://www.scientific-publications.net/en/article/1000198/
Powrót do spisu treści tomu
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
