COMPACTED CERAMICS INCORPORATING RECYCLED MARBLE PROCESSING RESIDUE
Asimina E. Domopoulou, Xenofon D. Spiliotis, Konstantinos I. Ntampegliotis, Konstantinos H. Gudulas, George A.-P. Papapolymerou, Vayos G. Karayannis
Strony: 786-791
Opublikowano: 28 Jun 2014
Wyświetlenia: 3,049
Pobrania: 1,349
Streszczenie: The recycling of marble processing residue as pore former into clayey mixtures for the development of lightweight thermal insulating ceramics can contribute both to sustainable management of this industrial secondary material and economic benefits. Indeed, use of ceramics as thermal insulators is one of the main applications for this category of materials. In the present research, clay minerals incorporating 0-50 wt.% marble powdery residue were compacted into 5 cm disc-shaped specimens and fired at 950°C, a sintering temperature typically applied in standard ceramic manufacturing. The characterization of sintered materials reveals successfully consolidated ceramic bodies even at 50 wt.% residue content, whereas both bulk density and thermal conductivity of sintered products clearly decrease as a result of an increased porosity attained with increasing the powder admixture percentage.
Słowa kluczowe: marble residue, compacted ceramics, sintering, thermal conductivity, porosity
Cytowanie artykułu: Asimina E. Domopoulou, Xenofon D. Spiliotis, Konstantinos I. Ntampegliotis, Konstantinos H. Gudulas, George A.-P. Papapolymerou, Vayos G. Karayannis. COMPACTED CERAMICS INCORPORATING RECYCLED MARBLE PROCESSING RESIDUE. Journal of International Scientific Publications: Materials, Methods & Technologies 8, 786-791 (2014). https://www.scientific-publications.net/en/article/1000231/
Powrót do spisu treści tomu
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
