ENERGY EFFICIENT METHOD FOR ENERGY RECOVERY FROM BIOGAS PRODUCTION
Janis Ratnieks, Andris Jakovics, Reviks Vardanjans, Aigars Laizans, Davids Vardanjans
Strony: 279-290
Opublikowano: 31 May 2015
Wyświetlenia: 3,846
Pobrania: 743
Streszczenie: A new method for biogas heating, cooling and drying has been developed. The method is based on two channel counter flow where recuperation happens. Biogas cooling is done with the dried colder flow to get the gas below the dew point temperature and allow it to condensate, but heating is done with humid hot gas flow from bioreactor. The system is being tested both experimentally and numerically by mathematical modelling. A previously developed 1D model has been implemented in MATLAB and calculations made for experimental setup. The results are also compared to 3D model made with ANSYS/CFX software.
Słowa kluczowe: experimental verification, mathematical modelling, counter flow, bioreactor
Cytowanie artykułu: Janis Ratnieks, Andris Jakovics, Reviks Vardanjans, Aigars Laizans, Davids Vardanjans. ENERGY EFFICIENT METHOD FOR ENERGY RECOVERY FROM BIOGAS PRODUCTION. Journal of International Scientific Publications: Materials, Methods & Technologies 9, 279-290 (2015). https://www.scientific-publications.net/en/article/1000775/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
